Siser EasyReflective Reflective Heat Transfer Vinyl 12"

The most trusted heat transfer vinyl brand in the world.

Siser HTV Color Comparison Chart

The Easiest Reflective HTV You've Ever Used!

EasyReflective is Siser®’s reflective HTV that weeds just like EasyWeed®! This highly-reflective heat transfer vinyl is truly an exceptional material, due to its glass bead construction that illuminates in the darkest of conditions. The frosted pressure sensitive (sticky) carrier even allows you to re-stick lifting material or replace a piece that’s accidentally weeded away. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, construction crew uniforms, and more!

EasyReflective is 140 Microns / 5.5 Mils and is a PU composition. EasyReflective is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories. Approximate width is 11.8"

Craft Cutter Settings (Chart)
Siser Romeo & Juliet

• Blade: Romeo & Juliet 45°
• Gram Force: 5-10
• Offset: 0.250
• Speed: 10

Brother Scan N Cut DX

• Blade: Autoblade
• Cut Speed: 5
• Half Cut: Auto

Cricut Explore Air

• Blade: AutoBlade, Standard
• Setting: Vinyl+/Everyday Iron On

Cricut Maker

• Blade: AutoBlade, Standard
• Setting: Vinyl+/Everyday Iron On

Silhouette 4 & 5

• Blade: AutoBlade, 3
• Material: Heat Transfer Smooth
• Force: 6
• Speed: 8

Roland GS/GX-24

• Blade: 45°
• Gram Force: 80-90
• Offset: .250
• Speed: 30-50 cm/s

Graphtec

• Blade: 45°
• Gram Force: 8-9
• Tool: CB09U+0
• Speed: 30 cm/s

Application Instructions
Iron Instructions

• Set iron dial between Cotton and Linen
  
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  
• Place on flat, hard surface (ironing board not recommended)
  
• Press iron with medium/firm pressure (do not slide iron)
  
• Press each section of design for 10-15 seconds • Peel carrier warm
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

Heating Press Instructions

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  
• Preheat garment for 2-3 seconds
  
• Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
  
• Peel carrier warm (5-10 seconds off the press)

EasyReflective Applies To

• 100% cotton
• Poly/cotton blends
• 100% polyester
  
• Nylon

Laundering Instructions

• Wait 24 hours before first wash
• Machine wash cold with mild detergent
• Dry on normal dryer setting
• Do not dry clean