Singer Beading Foot 250066396

Use the Beading Foot to easily sew beads, cords, yarns, sequins or other trims into place. The deep groove on the underside of the foot will allow piping or beads to be easily stitched into place.

Instructions

1. Snap the Beading Foot onto the machine.
2. Thread the top of the machine with clear monofilament thread and regular sewing thread in the bobbin.
3. Select zigzag stitch.
4. Position the beads or other trim into the groove of the foot. This will guide the trim as it is stitched.
5. Place fabric under the Beading Foot. Trims may be stitched on the edge or anywhere on the fabric.
6. Adjust zigzag width to accommodate the width of the trim. Turn the handwheel to permit the needle to go left and right to test that the needle will clear the trim and not break.
7. Sew slowly

It can also be used with a rolled hem stitch to make wire-edge ribbon for craft and home decor projects.

Compatible Machines

• Heavy Duty: 4411, 4423, 4432, 4452, 5511, 5523, 5532, 44S, HD6380,
• Talent: 3321, 3323S, 3323
• Curvy: 5625, 8763, 8767, 8770, 8780, Athena 2009
• One/160: Singer One, Singer One Plus, 70, 8768
• Cosmo/Confidence: S800, 5625, 7256, 7256 HC, 7258, 7285Q Patchwork, 7410, 7412, 7422, 7424, 7426, 7430, 7436, 7442, 7444, 7446, 7448, 7462, 7463, 7464, 7466, 7465, 7467, 7467S, 7468, 7469, 7469Q, 7470, 7563
• 9900: 9910, 9920, 9940, 9960, 9985, 9980, 9970
• Computerized: HD6600C, HD6700C, HD6800C, HD6620, 2010, 7140, ET-1, Futura 4060, H74, Stylist 9100, 9340, 9100 Professional
• Superb/Legacy: EM200, SE300, SE340, C440Q, C440