Siser EasySubli Mask 10"x 8" Sheets

The most trusted heat transfer vinyl brand in the world.

EasySubli Mask is to be used with EasySubli Heat Transfer Vinyl Click Here

Now that you have the sublimation solution to colored polyester and cotton garments, you’ll likely need the silicone solution for working with Easy Subli heat transfer vinyl.  EasySubli Mask is unlike any other Siser® TTD Masks for print and cut heat transfer vinyl. The masking process is familiar: use a squeegee to bond the mask and printed HTV in order to keep multiple pieces aligned and applied all at once. However, the mask itself is constructed differently and as a result is incompatible with Siser ColorPrint materials.  Additionally, TTD Masks are not compatible with EasySubli HTV.

For ease of use, EasySubli Mask is clear, silicone based, and comes on an aerated backing. The extra tacky adhesive is key to gripping printed EasySubli HTV to remove it from the original static backing and expose the heat activated adhesive side of the material. At this point, EasySubli is ready to be heat applied or you can place it on the mask’s aerated backing for storage.

For best color and image quality, we recommend EasySubli heat transfer vinyl be heat applied within 48 hours of printing.

What are the recommended accessories for EasySubli?

A sublimation printer

Siser EasySubli Inks by Sawgrass®

Vinyl Cutter (i.e. Silhouette Cameo, Cricut, etc.)

EasySubli Mask

Siser Squeegee

Heat Press

Siser has worked closely with Sawgrass to fine-tune the printing specifications and we recommend using Sawgrass printers and inks for best results.

What are the application specifications?

Before masking, place the printed design on the lower platen of the heat press for 45 seconds to allow the radiating heat from the upper platen to set the ink. Alternatively, you can set the design aside and allow it to air-dry for 2 hours before masking.

Applies to 100% Polyester, 100% Cotton, Poly/Cotton blends, and most other fabrics.

Can be applied to any color garment— not limited to just white polyester.

Applies at a lower temperature of 311°F for 15 seconds with a heat press