Siser Easy Subli HTV is required to be used with Easy Subli Mask Click Here

The most trusted heat transfer vinyl brand in the world.

The latest innovation in garment sublimation is here! EasySubli™ is a brand-new HTV by Siser® that allows you to print custom, full-color designs using your sublimation printer.
EasySubli can be fed directly through a sublimation printer, which eliminates the need for transfer papers. After printing, it is recommended that you allow the inks to dry for 2 hours before masking, or you can lay your design underneath an open heat press platen for about 45 seconds.

While traditional sublimation is limited to white polyester garments, EasySubli can be used with a variety of different fabrics and colors.
EasySubli is also applied at a low temperature of 311°F, compared to 380°F and above for traditional sublimation.

EasySubli is designed to work with virtually any sublimation printer, however, we recommend Sawgrass® machines and the specially formulated Siser EasySubli Inks by Sawgrass for best results.

Thermotransfer film with plain polyester backing, designed for sublimation ink printers. It grants vibrant colours and a stunning thin design on the garment and allows to decorate cotton fabrics with sublimation inks. Suitable textiles: cotton (all colors) and white/light coloured polyester or poly/cotton blend, not treated.

What are the recommended accessories for EasySubli?

• A sublimation printer
• Siser EasySubli Inks by Sawgrass®
• Vinyl Cutter (i.e. Silhouette Cameo, Cricut, Brother ScanNCut, etc.)
• EasySubli Mask
• Siser Squeegee
• Heat Press

While EasySubli is designed to work with virtually any sublimation printer— such as those from Mutoh®, Mimaki®, Roland®, and HP®— Siser has worked closely with Sawgrass to fine-tune the printing specifications and we recommend using Sawgrass printers and inks for best results.

What are the application specifications?

• Before masking, place the printed design on the lower platen of the heat press for 45 seconds to allow the radiating heat from the upper platen to set the ink. Alternatively, you can set the design aside and allow it to air-dry for 2 hours before masking.

• Applies to 100% Polyester, 100% Cotton, Poly/Cotton blends, and most other fabrics.
• Can be applied to any color garment— not limited to just white polyester.
• Applies at a lower temperature of 311°F for 15 seconds with a heat press

Applying:
Thickness: 220 microns
Applies to: 100% Cotton, 100% Polyester, Poly/Cotton blends
Temperature: 311°F/155°C
Time: 15 seconds
Pressure: Medium Peel:  Warm

Laundering:
Wait 24 hours before first wash.
Machine wash warm or cold with mild detergent
Dry on low dryer setting
Do not dry clean or bleach
Wash inside-out for best results