Envío gratis a partir de $19.99

Garantía de devolución de dinero de 60 días

Siser StripFlock Pro Flocked Heat Transfer Vinyl 12"

Precio
$4.99
Color:
Royal Blue
Size:
10" Sheet
Color: Royal Blue / Size: 10" Sheet

Notificación de existencias

Reciba una notificación cuando este producto vuelva a estar disponible

Agotado
Ver todas las opciones como una lista
Envíos neutros en carbono en todos los pedidos

Descripción detallada

The most trusted heat transfer vinyl brand in the world.

Siser HTV Color Comparison Chart

World Weidner Authorized Distributor Certificate

The Only Flock in the Industry that Can Be Layered on Itself!

A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The fuzzy opaque colors make StripFlock Pro excellent for retro designs like you'd find in a mall in the 80's, or anytime you want a deep, rich look. StripFlock Pro is thick enough to cover hat seams, yet also looks excellent on bags, denim, and other garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials such as EasyWeed® EcoStretch™ for an embossed look, or layer with more StripFlock! The ability to layer this material with itself and others allows you to say “yes” to multi-color designs.

StripFlock Pro is 410 Microns / 16.1 Mils and is a PVC composition. StripFlock Pro is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories. Approximate width is 11.8". 

Craft Cutter Settings (Chart)
Siser Romeo & Juliet

  • Blade: Romeo & Juliet 45°
  • Gram Force: 20-25
  • Offset: 0.250
  • Speed: 10

Brother Scan N Cut DX

  • Blade: Autoblade
  • Cut Speed: 5
  • Half Cut: 4

    Cricut Explore Air

    • Blade: AutoBlade, Standard
    • Setting: Iron On/Everyday Iron On

    Cricut Maker

    • Blade: AutoBlade, Standard
    • Setting: Vinyl+/Everyday Iron On

    Silhouette 4 & 5

    • Blade: AutoBlade, 3-4
    • Material: Heat Transfer Flocked
    • Force: 6
    • Speed: 8

    Roland GS/GX-24

    • Blade: 45°
    • Gram Force: 80-90
    • Offset: .250
    • Speed: 30-50 cm/s

    Graphtec

    • Blade: 45°
    • Gram Force: 9-10
    • Tool: CB09U+0
    • Speed: 30 cm/s

    Application Instructions
    Iron Instructions

    • Set iron dial between Cotton and Linen
    • Cover with Heat Transfer Cover Sheet or Multipurpose Paper
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with medium/firm pressure (do not slide iron)
    • Press each section of design 15 seconds
    • Peel carrier warm
    • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

    Heating Press Instructions

    • Cover with Heat Transfer Cover Sheet or Multipurpose Paper
    • Preheat garment for 2-3 seconds
    • Apply design at 310°F/155°C (EasyPress® users add approx. 30°)
    • Use medium pressure for 15 seconds
    • Peel carrier warm (at least 10 seconds off the press)

    StripFlock Pro Applies To

    • 100% cotton
    • Poly/cotton blends
    • 100% polyester
    • Leather

    Laundering Instructions

    • Wait 24 hours before first wash
    • Machine wash cold with mild detergent
    • Dry on normal dryer setting
    • Do not dry clean
    • Liquid fabric softener not recommended

    Recomendado para ti

    Tu historial de navegación