Siser Sparkle Heat Transfer Vinyl 12"

The most trusted heat transfer vinyl brand in the world.

Siser HTV Color Comparison Chart

Make Your Designs Shimmer and Sparkle!

Sparkle™ Heat Transfer Vinyl is a fashionable alternative to Glitter HTV by Siser®. Specially constructed to be soft to the touch, each color includes silver glitter specks embedded in the material so designs have a smooth finish. Sparkle is available in 14 colors, including silver and gold. Looking to layer? Sparkle can be layered for ultimate bling! Think outside the box and use Sparkle HTV on shoes, belts, and other hard-to-print items. If you like to keep it simple, Sparkle can be applied to t-shirts, hoodies, sweats and scrubs too!

Sparkle is 90 Microns / 3.54 Mils and is a PU composition. Sparkle is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories. Approximate width is 11.8". 

Craft Cutter Settings (Chart)
Siser Romeo & Juliet

• Blade: Romeo & Juliet 45°
• Gram Force: 10-15
• Offset: 0.250
• Speed: 10

Brother Scan N Cut DX

• Blade: Autoblade
• Cut Speed: 5
• Half Cut: Auto

Cricut Explore Air

• Blade: AutoBlade, Standard
• Setting: Vinyl+/Everyday Iron On

Cricut Maker

• Blade: AutoBlade, Standard
• Setting: Vinyl+/Everyday Iron On

Silhouette 4 & 5

• Blade: AutoBlade, 3
• Material: Heat Transfer Smooth
• Force: 6
• Speed: 8

Roland GS/GX-24

• Blade: 45°
• Gram Force: 80-90
• Offset: .250
• Speed: 30-50 cm/s

Graphtec

• Blade: 45°
• Gram Force: 9-10
• Tool: CB09U+0
• Speed: 30 cm/s

Application Instructions
Iron Instructions

• Set iron dial between Cotton and Linen
  
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  
• Place on flat, hard surface (ironing board not recommended)
  
• Press iron with medium/firm pressure (do not slide iron)
  
• Press each section of design for 10-15 seconds
  
• Peel carrier cold
  
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

Heating Press Instructions

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  
• Preheat garment for 2-3 seconds
  
• Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
  
• Use medium/firm pressure for 10-15 seconds
  
• Peel carrier cold
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

Sparkle Applies To

• 100% cotton
• Poly/cotton blends
• 100% polyester
  
• Leather

Laundering Instructions

• Wait 24 hours before first wash
• Machine wash cold with mild detergent
• Dry on normal dryer setting
• Do not dry clean
• Liquid fabric softener not recommended