Siser EasyPatterns Plus Heat Transfer Vinyl 12"

The most trusted heat transfer vinyl brand in the world.

Siser HTV Color Comparison Chart

Pre-Masked Patterns with a Sleek, Satin Finish!

EasyPatterns® Plus are the wow factor you’re looking for! These pre-printed, pre-masked patterns eliminate the need for layering multiple solid colors, resulting in less weight on the garment! Available in styles ranging from classic to cool, there’s bound to be a pattern that’s perfect for your next project. EasyPatterns Plus were designed to fit into a variety of vinyl cutters as easily as they fit into a variety of niches and trends. Simply cut your design like our other HTV materials and weed away the excess from the built-in carrier. Mix and match EasyPatterns Plus with other types of Siser® HTV for extraordinary styles. Be sure to keep EasyPatterns Plus as the top layer for best results. With a semi-gloss finish and soft hand, these pre-printed and masked patterns are the star of the show — even when applied with a home iron!

EasyPatterns Plus Satin is 80 Microns / 5.5 Mils. EasyPatterns Plus Satin is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories. Approximate width is 11.8"

Craft Cutter Settings (Chart)
Siser Romeo & Juliet

• Blade: Romeo & Juliet 45°
• Gram Force: 5-10
• Offset: 0.250
• Speed: 10

Brother Scan N Cut DX

• Blade: Autoblade
• Cut Speed: 5
• Half Cut: Auto

Cricut Explore Air

• Blade: AutoBlade, Standard
• Setting: Everyday Iron On

Cricut Maker

• Blade: AutoBlade, Standard
• Setting: Vinyl+/Everyday Iron On

Silhouette 4 & 5

• Blade: AutoBlade, 3
• Material: Heat Transfer Smooth
• Force: 6
• Speed: 8

Roland GS/GX-24

• Blade: 45°
• Gram Force: 80-90
• Offset: .250
• Speed: 30-50 cm/s

Graphtec

• Blade: 45°
• Gram Force: 8-9
• Tool: CB09U+0
• Speed: 30 cm/s

Application Instructions
Iron Instructions

• Set iron dial between Cotton and Linen
  
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
  
• Press each section of design for 15 seconds
  
• Peel carrier cold
  
• If areas of design lift after application, replace cover sheet and re-press
  for 5-10 seconds

Heating Press Instructions

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  
• Preheat garment for 2-3 seconds
  
• Apply design at 320°F/160°C (EasyPress® users add approx. 30°)
  
• Use medium pressure for 15 seconds
  
• Peel carrier hot or cold

EasyPatterns Plus Applies To

• 100% cotton
• Poly/cotton blends
• 100% polyester
  
• Leather

Laundering Instructions

• Wait 24 hours before first wash
• Machine wash cold with mild detergent
• Dry on normal dryer setting
• Do not dry clean