Siser StripFlock® Pro HTV 12" Rolls
Also Available in Our Retail Store
1001 Knight Avenue, Ponca City, OK 74601
Call for More Information: (580)765-9999
The most trusted heat transfer vinyl brand in the world.
Siser HTV Color Comparison Chart
A great alternative to embroidery, StripFlock heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep opaque colors make StripFlock excellent for retro designs or anytime you want a rich look. StripFlock looks excellent on caps, bags, and garments that need textured visual interest. Use StripFlock as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say "yes" to multi-color designs. Approximate width is 11.8"
StripFlock is 410 Microns / 16.1 Mils and is a PU Composition.
Main Features
DIY Apparel
Personalize t-shirts, hoodies, pants, hats, bags, and so much more! StripFlock Pro allows you to customize a wide variety of fabrics including cotton, polyester, blends, leather, and more!
Flocked Finish
StripFlock Pro adds texture to your designs! With a suede-like “fuzzy” feel, StripFlock Pro adds a soft touch to your creations. Great for kid’s clothes, pillows, blankets, and more!
Layerable
Mix and match colors by layering StripFlock Pro on itself and other layerable materials- just like EasyWeed! Press with a quick tack and peel the carrier hot for multiple layers.
Easy Application
StripFlock Pro was designed to make the heat application process as painless as possible. Apply with a heat press set to 310°F with medium pressure for 15 seconds. You can also apply StripFlock Pro with a home iron set to "Cotton" or "High"!
Craft Cutter Settings (Chart)
Siser Romeo & Juliet
- Blade: Romeo & Juliet 45°
- Gram Force: 20-25
- Offset: 0.250
- Speed: 10
Brother Scan N Cut DX
- Blade: Autoblade
- Cut Speed: 5
- Half Cut: 4
Cricut Explore Air
- Blade: AutoBlade, Standard
- Setting: Iron On
Cricut Maker
- Blade: AutoBlade, Fine-Point
- Setting: Heat Transfer (Non-Cricut)
Silhouette 4
- Blade: AutoBlade, 3-4
- Material: Heat Transfer Flocked
- Force: 6
- Speed: 5
Roland GS/GX-24
- Blade: 45°
- Gram Force: 80-120
- Offset: .250
- Speed: 30-50 cm/s
Graphtec
- Blade: 45°
- Gram Force: 8-9
- Tool: CB09U+0
- Speed: 30 cm/s
Application Instructions
Iron Instructions
- Set iron dial between Cotton and Linen
- Cover design with Heat Transfer Cover Sheet or Multipurpose Paper
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure for 10-15 seconds
- Peel carrier warm
Heating Press Instructions
- Preheat garment for 2-3 seconds
- Apply design at 311°F / 155°C (EasyPress users add approx. 30°)
- Use medium pressure for 10-15 seconds
- Peel carrier warm
StripFlock Pro Applies To
- 100% cotton
- Poly/cotton blends
- 100% polyester
- Leather
Laundering Instructions
- Wait 24 hours before first wash
- Machine wash warm or cold with mild detergent
- Do not bleach, dry clean, or use liquid fabric softener
- Dry on normal dryer setting