Your cart is empty
Looks like you haven't added anything to your cart yet
Detailed Description
JUKI MO-1200QVP 2/3/4 Thread Overlock with Differential Feed and Rolled Hem
Also Available in Our Retail Store
Call for More Information or Special Promotions
The compact and easy-to-operate JUKI MO-1200QVP gives you easy and affordable access to the fascinating world of overlock. The JUKI MO-1200QVP can sew stretchy and knit fabrics, such as silk, fleece, and denim with ease thanks to the adjustable thread tension and the 2-, 3-, and 4- thread options. Perfect narrow seams, decorative rolled hems, and gathers can now be done far more quickly and skillfully.
Main Features
Differential Feeds
Adjustable stitch length by simply turning the exterior dial on the right-hand side.
Wide Variety of Stitch Patterns
Sew both stretchy and knit fabrics with the 2/3/4 thread overlock with chain stitch and cover stitch, 3-thread narrow overlock, and 3-thread rolled hem.
Adjustable Stitch Length
Change the length of your stitch according to your project by simply turning the dial located on the exterior right-hand side within the range of 1 to 4mm.
Lay-In Tension Slots
Thread easily and efficiently by following the color-coded thread paths on the tension slots.
Lower Looper Threader
Slide the thread into the slot and snap the looper into place allowing for easy threading in seconds!
Bright LED Light
Brightens the needle entry area. The LED light will not heat up even during long hours of operation.
Cutting Width
Create perfect seams and rolled edges by adjusting the cutting width with ease.
Bright LED Light
Brightens the needle entry area. The LED light will not heat up even during long hours of operation.
Presser Foot Pressure Adjustment
Ability to adjust the presser foot pressure according to the type of material being sewn.
Basic Features
- Needle Type: 130R / 705H
- Number of Threads: 2/3/4 Threads
- Maximum Stitch Speed: 1,500 spm
- Max. Stitch Length: 4mm
- Max. Overlock Width: 7mm
- Presser Foot Lift: Manual
- Adjustable Foot Pressure: Yes
- Machine Weight: 15lb
Customer Reviews
Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
W
Although I threaded by tying on the new spools I took pictures in case I break a looper thread and have to follow the diagram. My new machine came prethreaded with all white threads. So I tied colored threads to match the diagram and took a picture which I include here for you future buyers. The manual diagram page indicating each lever and dial was a problem. I corrected and post that picture too.
g
I am new to serging so I shopped around a lot comparing quality and features. This machine has high impact plastic case and the innards are all metal. It has been easy to thread in that it has clearly marked pathways. I don't do enough serging (yet?) to justify the expense of an air threader and this is easy enough to understand after some practice. The book does describe the required steps. I do wish the manual had actual photos rather than illustrations. Beginners might need a companion serger guide to describe what the various stitches are and how to use them. I do not like the foot pedal. It is too light weight and too small making it harder to control given the speed at which a serger can stitch. Lastly, do yourself and your machine a favor and buy quality thread. Book calls for 120/2 and if you get quality thread from your sewing shop you will save yourself frustration from breakage.
Recommended for You
Your Browsing history
- Choosing a selection results in a full page refresh.