Your cart is empty
Looks like you haven't added anything to your cart yet
Detailed Description
StarCraft Inkjet Printable Heat Transfer Craft for Vinyl 8.5 x 11 Sheet(s) for Black and Dark Materials
Our inkjet printable transfers for Dark Materials make it easy to create your own printed image for application to colored garments ranging from darker pastels to black. A heat press is recommended for applying this product because of the temperature and pressure requirements. Peel from the backing paper or use heat transfer mask before pressing.
StarCraft Transfers for Dark Materials are easy to identify by the red logo printed on the back of each sheet as well as the red instructions.
Click here for help deciding which transfer material is right for your application
Printing and Application Instructions:
- Print right facing (do not mirror) on the opaque material side of the paper.
- Trim away the excess material. You may do this with scissors or a die cutting machine. Weed away excess material from die- cutting if necessary
- Remove the image from the release liner (the backing). For many images, it is best to use heat transfer mask to remove the image and press as the material is somewhat delicate.
- Apply the printed image side up.
- Press at 350 Degrees for 30 Seconds under Medium pressure. Temperature and pressure are very important.
- Peel the backing from the image after completely cooled.
Washing and Care Instructions:
- To wash, turn garment inside out.
- Wash in cold water. Do not bleach.
- Tumble dry low heat (hang dry recommended).
- If ironing, do NOT iron directly on the applied image. Use with Non Stick Heat Transfer Sheet
Recommended for You
Your Browsing history
- Choosing a selection results in a full page refresh.