StarCraft Gloss UV Laminate for Inkjet Printable Adhesive Vinyl 8.5" x 11" Sheet(s)

UV Laminates
StarCraft Matte or Glossy UV Laminate is excellent for protecting your StarCraft Inkjet Printable Adhesive Vinyl from UV (sun) exposure, dirt, grime, water, and adhesives. This means the use of transfer tape may be difficult or even impossible.  We recommend simply peeling and sticking your design onto the desination surface.  If your design has small parts that are separated, this may complicate application.

Application Instruction:
1.  Print images onto StarCraft inkjet printable adhesive vinyl using a standard consumer grade inkjet printer.  (no laser printers)
2.  Apply StarCraft UV Laminate over the design carefully, avoiding air bubbles.  A squeegee is recommended for application.  It is not recommended to apply an entire sheet if not necessary, apply only enough to cover your printed design.
3.  Cut around your design using print and cut technology with a die-cutting machine and software.  Additional pressure or multiple cuts is normally required since the laminate adds another layer.
4.  Peel and stick your design to a clean, dry, wax-free surface.  

Care Instruction: 
Do not use in dishwasher or microwave or exposure to harsh enviroments may reduce life expectancy.

Use with StarCraft Inkjet Printable Permanent Adhesive Vinyl