| | |
|
| |
| | |
|
|
Home > AccuQuilt > AccuQuilt Go! Die Square on Point-4 3/4" (4 1/4" Finished) 55019
|
AccuQuilt Go! Die Square on Point-4 3/4" (4 1/4" Finished) 55019
|
55019
|
Detailed Description
Talk about versatility. This GO! Square on Point die is just the right size to be used on point, in combination with seven additional AccuQuilt GO! Mix and Match System dies. The shapes cut with this die will come out perfect every time and may be featured in the center of Square in a Square and Flying Triangles quilt block designs. You can also use the die to cut background squares for a small applique. Smart!
| Designer |
AccuQuilt |
|---|
| Compatible Fabric Cutter |
GO! Baby Fabric Cutter (55300), GO! Fabric Cutter (55100), Studio Fabric Cutter (50800) |
|---|
| Cutting Mat/Plastic Required |
GO! Cutting Mat, 6" x 12" (15.2 cm x 30.4 cm) Item 55112 |
|---|
| Cut Size |
4 3/4"W x 4 3/4"H (12 cm x 12 cm) squares |
|---|
| Finished Size |
4 1/4"W x 4 1/4"H (12 cm x 12 cm) squares |
|---|
| Die Board Size |
6 in. x 12 in. (15.2 cm x 30.4 cm) |
|---|
| Item |
55019 |
|---|
| Weight in lbs. |
1.21 |
|---|
| Brand |
AccuQuilt |
|---|
| Warranty |
Limited One Year |
|---|
Use with AccuQuilt GO! Fabric Cutter .
Warranty: AccuQuilt GO! dies are guaranteed for one year.
Care & Maintenance: Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.
Die Tips:
- With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
- Use cutting mats that matches size of each die.
- For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
- Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
- Some dies feature specially designed corners to aid in alignment and pre-cutting.
- For fast applique, apply fusible web to fabrics, then cut shapes with dies.
- Use good quality fabric to reduce fabric stretch.
- It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.
Product Reviews
| 
|
|