| | |
|
| |
| | |
|
|
Home > AccuQuilt > AccuQuilt Go! Die Arabesque #1 by Ricky Tims 55046
|
AccuQuilt Go! Die Arabesque #1 by Ricky Tims 55046
|
55046
|
Detailed Description
You are an artist and quilting is your medium. The intricate GO! Arabesque #1 by Ricky Tims gives you an intricate design palette to add to your fabric arts. Without your AccuQuilt GO! and this die, it would be nearly impossible to cut the detailed pattern perfectly, but now you'll get clean, precise cuts even through multiple fabric layers. Stunning! Ricky Tims is one of the most celebrated modern-day quilters for a reason, his signature, contemporary quilts have been displayed worldwide and feature intricate, symmetrical designs with flowing curves.
| Designer |
Ricky Tims |
|---|
| Compatible Fabric Cutter |
GO! Fabric Cutter (55100), Studio Fabric Cutter (50800) |
|---|
| Cutting Mat/Plastic Required |
GO! Cutting Mat, 10" x 10" (25.4 cm x 25.4 cm) Item 55111 |
|---|
| Cut Size |
- Small Fern 3 5/8"W x 3 1/16"H (9.2 cm x 7.8 cm)
- Medium Fern 8 1/16"W x 4 1/4"H 20.5 cm x 10.8 cm)
- Large Fern 10 3/16"W x 5"H (25.8 cm x 12.7 cm)
|
|---|
| Finished Size |
8"W x 8"H (20.3 cm x 20.3 cm) |
|---|
| Die Board Size |
10 in. x 10 in. (25.4 cm x 25.4 cm) |
|---|
| Item |
55046 |
|---|
| Weight in lbs. |
0.605 |
|---|
| Brand |
AccuQuilt |
|---|
| Warranty |
Limited One Year |
|---|
Use with AccuQuilt GO! & Go! Baby Fabric Cutter .
Warranty: AccuQuilt GO! dies are guaranteed for one year.
Care & Maintenance: Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.
Die Tips:
- With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
- Use cutting mats that matches size of each die.
- For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
- Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
- Some dies feature specially designed corners to aid in alignment and pre-cutting.
- For fast applique, apply fusible web to fabrics, then cut shapes with dies.
- Use good quality fabric to reduce fabric stretch.
- It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.
Product Reviews
| 
|
|