| | |
|
| |
| | |
|
|
Home > AccuQuilt > AccuQuilt GO! Die LeMoyne Star 9" Finished 55453
AccuQuilt GO! Die LeMoyne Star 9" Finished 55453
|
55453
|
Detailed Description
Classic block finishes at 9". Pair with other blocks created with the 9" GO! Mix & Match Set. Use all of the shapes together or separately for a wide range of projects. The deam allowance is included for easy and accurate piecing. Shapes are placed on the die board at a slight angle for cutting performance. Arrange your fabric on the same angle. GO! fabric cutters will cut up to six layers of wide variety of fabrics. The number of layers you can cut is determined by the thickness and type of fabric. Always start with fewer layers and build up. How to Die Cut LeMoyne Star Quilt Blocks:
For best cutting results, postition fabric on the lengthwise grain (straight of grain) as it goes under the roller. Tip: The die is designed to cut one complete two-color 9" black in one pass through the cutter. To create a two color LeMoyne Star Block: Cut four layers at a time with two layers of the first color with fabric right sides up and two layers of a second color wrong sides up.
Cut 7 3/4" x 6 3/4" rectangles. Layer two layers of the same color right sides up and two layers of a second color wrong sides up on the blades and cut. For a two-color design, 3 cuts across the width of fabric yield enough pieces for 3 complete blocks; and one yard of 40" wide fabric in each color will yield 12 blocks. Measurements:
Creates 9" finished blocks. Includes seam allowance and dog-eared corners for easy piecing. Cut Size: Two 3 1/8" W x 3 1/8" H (7.9 cm x 7.9 cm) half square triangles with dog-eared corners, Two 2 3/8" W x 2 3/8" H (6 cm x 6 cm) half square triangles with dog-eared corners, Two 45 degree diamonds with 3 3/8" sides (8.7 cm) with dog-earned corners. Finished Size: 9" Finished Block (22.9 cm)Coordinates with:
9" Mix & Match Set
Use with AccuQuilt GO! & Go! Baby Fabric Cutter .
Warranty: AccuQuilt GO! dies are guaranteed for one year.
Care & Maintenance: Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.
Die Tips:
- With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
- Use cutting mats that matches size of each die.
- For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
- Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
- Some dies feature specially designed corners to aid in alignment and pre-cutting.
- For fast applique, apply fusible web to fabrics, then cut shapes with dies.
- Use good quality fabric to reduce fabric stretch.
- It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.
Product Reviews
|
|
|