| | |
|
| |
| | |
|
|
AccuQuilt Go! Die Overall Sam 55062
|
55062
|
Detailed Description
The GO! Overall Sam makes cutting out this little guy fast and easy. This die is designed to cut precisely through several layers of fabric at once and you can minimize fabric waste by aligning fabrics just over the shapes you want, not the whole board. Overall Sam has a crush on Sunbonnet Sue (55061), they make a cute couple when paired together.
Designer |
AccuQuilt |
Compatible Fabric Cutter |
GO! Baby Fabric Cutter (55300), GO! Fabric Cutter (55100) |
Cutting Mat/Plastic Required |
GO! Cutting Mat, 5" x 10" (12.7 cm x 25.4 cm) Item 55110 |
Cut Size |
Hat 5 3/8"W x 2 7/8"H, Shirt 2 7/8"W x 1 9/16"H, Pants 2 7/8"W x 2 7/8"H, Shoe 2 1/2"W x 1 1/8"H, Suspender 5/8"W x 1 7/8"H, Sleeve 1 3/16"W x 1 3/4"H and Hand 15/16"W x 3/4"H |
Finished Size |
4 1/2"W x 8 1/2"H assembled |
Die Board Size |
5 in. x 10 in. (12.7 cm x 25.4 cm) |
Item |
55062 |
Weight in lbs. |
0.88 |
Brand |
AccuQuilt |
Warranty |
Limited One Year |
Use with AccuQuilt GO! & Go! Baby Fabric Cutter .
Warranty: AccuQuilt GO! dies are guaranteed for one year.
Care & Maintenance: Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.
Die Tips:
- With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
- Use cutting mats that matches size of each die.
- For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
- Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
- Some dies feature specially designed corners to aid in alignment and pre-cutting.
- For fast applique, apply fusible web to fabrics, then cut shapes with dies.
- Use good quality fabric to reduce fabric stretch.
- It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.
Product Reviews
|
|
|